ATV212HD11N4 | Altivar 212 VFD, 15 hp/22.5 amps, 400/480 VAC Three Phase Input/Three Phase Output, IP20 Housing (Replaces the Altivar21) | Square D

Altivar 212 VFD, 15 hp/22.5 amps, 400/480 VAC Three Phase Input/Three Phase Output, IP20 Housing (Replaces the Altivar21)

• 15 HP
• Continuous Output Current: 22.5 amps
• AC Line Input Line Voltage: 380/480 VAC Three Phase Input/Output
• Enclosure Rating: IP20

• 3 logic inputs
• 2 analog inputs
• 1 analog output
• 2 relay outputs (with 1 NO and 1 NO/NC contacts)
• Integrated 4 digit, 7-segment LED display with a 7 button keypad
• RJ45 Modbus port plus a four-screw terminal block for BACnet, Modbus, Metasys N2 and Apogee P1 communication protocols
• LonWorks is available in an option card
  This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 6.45kg and its dimensions are, 180mm wide, 232mm high, 170mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet. It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

  device short name

  ATV212

  product destination

  Asynchronous motors

  Phase

  3 phase

  motor power kW

  11 kW

  Maximum Horse Power Rating

  15 hp

  supply voltage limits

  323…528 V

  supply frequency

  50...60 Hz - 5...5 %

  line current

  16.8 A 480 V;21.1 A 380 V

  Range of Product

  Altivar 212

  Product or Component Type

  Variable speed drive

  Product Specific Application

  Pumps and fans in HVAC

  Communication Port Protocol

  METASYS N2;APOGEE FLN;LonWorks;BACnet;Modbus

  [Us] rated supply voltage

  380...480 V - 15...10 %

  EMC filter

  Class C2 EMC filter integrated

  IP degree of protection

  IP21

  apparent power

  17.1 kVA 380 V

  continuous output current

  22.5 A 380 V;22.5 A 460 V

  maximum transient current

  24.8 A 60 s

  speed drive output frequency

  0.5…200 Hz

  speed range

  1…10

  speed accuracy

  +/- 10 % of nominal slip 0.2 Tn to Tn

  local signalling

  for DC bus energized 1 LED (red)

  output voltage

  <= power supply voltage

  isolation

  Electrical between power and control

  type of cable

  Without mounting kit 1 IEC cable 113 °F (45 °C);copper 90 °C / XLPE/EPR;Without mounting kit 1 IEC cable 113 °F (45 °C);copper 70 °C / PVC;With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C);copper 75 °C / PVC

  electrical connection

  VIA;VIB;FM;FLA;FLB;FLC;RY;RC;F;R;RES terminal 0.00 in² (2.5 mm²) / AWG 14;L1/R;L2/S;L3/T terminal 0.02 in² (16 mm²) / AWG 6

  tightening torque

  5.31 lbf.in (0.6 N.m) VIA;VIB;FM;FLA;FLB;FLC;RY;RC;F;R;RES);22.13 lbf.in (2.5 N.m);22 lb.in L1/R;L2/S;L3/T)

  supply

  Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %;<10 A overload and short-circuit protection;Internal supply 24 V DC 21…27 V);<200 A overload and short-circuit protection

  sampling duration

  2 ms +/- 0.5 ms F discrete;2 ms +/- 0.5 ms R discrete;2 ms +/- 0.5 ms RES discrete;3.5 ms +/- 0.5 ms VIA analog;22 ms +/- 0.5 ms VIB analog

  response time

  FM 2 ms +/- 0.5 ms analog;FLA;FLC 7 ms +/- 0.5 ms discrete;FLB;FLC 7 ms +/- 0.5 ms discrete;RY;RC 7 ms +/- 0.5 ms discrete

  accuracy

  +/- 0.6 % VIA) for a temperature variation 60 °C;+/- 0.6 % VIB) for a temperature variation 60 °C;+/- 1 % FM) for a temperature variation 60 °C

  linearity error

  VIA +/- 0.15 % of maximum value input;VIB +/- 0.15 % of maximum value input;FM +/- 0.2 % output

  analogue output type

  FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits;FM switch-configurable current 0...20 mA 970 Ohm 10 bits

  discrete output type

  Configurable relay logic FLA;FLC) NO - 100000 cycles;Configurable relay logic FLB;FLC) NC - 100000 cycles;Configurable relay logic RY;RC) NO - 100000 cycles

  minimum switching current

  3 mA 24 V DC configurable relay logic

  maximum switching current

  5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL;R);5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL;R);2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL;R);2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL;R)

  discrete input type

  F programmable 24 V DC level 1 PLC 4700 Ohm;R programmable 24 V DC level 1 PLC 4700 Ohm;RES programmable 24 V DC level 1 PLC 4700 Ohm

  discrete input logic

  Positive logic (source) F;R;RES);<= 5 V;>= 11 V;Negative logic (sink) F;R;RES);>= 16 V;<= 10 V

  dielectric strength

  3535 V DC between earth and power terminals;5092 V DC between control and power terminals

  insulation resistance

  >= 1 mOhm 500 V DC for 1 minute

  frequency resolution

  Display unit 0.1 Hz;Analog input 0.024/50 Hz

  Communication Service

  Read holding registers (03) 2 words maximum;Time out setting from 0.1 to 100 s;Write single register (06);Monitoring inhibitable;Write multiple registers (16) 2 words maximum;Read device identification (43)

  option card

  Communication card LonWorks

  power dissipation in W

  430 W

  air flow

  38833.99 Gal/hr(US) (147 m3/h)

  functionality

  Mid

  specific application

  HVAC

  Variable speed drive application selection

  Compressor for scroll Building - HVAC;Fan Building - HVAC;Pump Building - HVAC

  Motor power range AC-3

  7…11 kW 380…440 V 3 phase;7…11 kW 480…500 V 3 phase

  motor starter type

  Variable speed drive

  discrete output number

  2

  analogue input number

  2

  analogue input type

  VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits;VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits;VIB configurable PTC probe 0...6 probes 1500 Ohm;VIA switch-configurable current 0...20 mA 250 Ohm 10 bits

  analogue output number

  1

  physical interface

  2-wire RS 485

  Connector Type

  1 open style;1 RJ45

  Transmission Rate

  9600 bps or 19200 bps

  transmission frame

  RTU

  number of addresses

  1…247

  data format

  8 bits;1 stop;odd even or no configurable parity

  type of polarization

  No impedance

  asynchronous motor control profile

  Voltage/frequency ratio;2 points;Voltage/frequency ratio;automatic IR compensation (U/f + automatic Uo);Flux vector control without sensor;standard;Voltage/frequency ratio - Energy Saving;quadratic U/f;Voltage/frequency ratio;5 points

  torque accuracy

  +/- 15 %

  transient overtorque

  120 % of nominal motor torque +/- 10 % 60 s

  acceleration and deceleration ramps

  Automatic based on the load;Linear adjustable separately from 0.01 to 3200 s

  motor slip compensation

  Not available in voltage/frequency ratio motor control;Adjustable;Automatic whatever the load

  switching frequency

  6...16 kHz adjustable;12...16 kHz with derating factor

  nominal switching frequency

  12 kHz

  braking to standstill

  By DC injection

  Network Frequency

  47.5...63 Hz

  prospective line Isc

  22 kA

  protection type

  Overheating protection drive;Thermal power stage drive;Short-circuit between motor phases drive;Input phase breaks drive;Overcurrent between output phases and earth drive;Overvoltages on the DC bus drive;Break on the control circuit drive;Against exceeding limit speed drive;Line supply overvoltage and undervoltage drive;Line supply undervoltage drive;Against input phase loss drive;Thermal protection motor;Motor phase break motor;With PTC probes motor

  Width

  7.09 in (180 mm)

  Height

  9.13 in (232 mm)

  Depth

  6.69 in (170 mm)

  Net Weight

  14.22 lb(US) (6.45 kg)

  pollution degree

  2 IEC 61800-5-1

  IP degree of protection

  IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1;IP20 on upper part without blanking plate on cover EN/IEC 60529;IP21 EN/IEC 61800-5-1;IP21 EN/IEC 60529;IP41 on upper part EN/IEC 61800-5-1;IP41 on upper part EN/IEC 60529

  vibration resistance

  1.5 mm 3…13 Hz)EN/IEC 60068-2-6;1 gn 13…200 Hz)EN/IEC 60068-2-8

  shock resistance

  15 gn 11 ms IEC 60068-2-27

  environmental characteristic

  Classes 3C1 IEC 60721-3-3;Classes 3S2 IEC 60721-3-3

  noise level

  51 dB 86/188/EEC

  operating altitude

  3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m;<= 3280.84 ft (1000 m) without derating

  relative humidity

  5…95 % without condensation IEC 60068-2-3;5…95 % without dripping water IEC 60068-2-3

  ambient air temperature for operation

  14…104 °F (-10…40 °C) without derating);104…122 °F (40…50 °C) with derating factor)

  operating position

  Vertical +/- 10 degree

  Product Certifications

  C-tick;NOM 117;CSA;UL

  Marking

  CE

  Standards

  EN 61800-3 category C2;EN 61800-3 environments 1 category C2;IEC 61800-3 category C3;EN 61800-3 environments 1 category C3;IEC 61800-3 environments 2 category C3;UL Type 1;IEC 61800-3 environments 1 category C1;IEC 61800-3 environments 1 category C3;EN 61800-3 environments 2 category C3;EN 61800-3 environments 2 category C2;EN 61800-3;IEC 61800-3 category C2;EN 61800-3 environments 1 category C1;EN 61800-5-1;EN 55011 class A group 1;IEC 61800-3 environments 2 category C2;EN 61800-3 category C3;IEC 61800-5-1;EN 61800-3 environments 2 category C1;IEC 61800-3;IEC 61800-3 environments 1 category C2;IEC 61800-3 environments 2 category C1

  assembly style

  With heat sink

  electromagnetic compatibility

  Electrostatic discharge immunity test level 3 IEC 61000-4-2;Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3;Electrical fast transient/burst immunity test level 4 IEC 61000-4-4;1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5;Conducted radio-frequency immunity test level 3 IEC 61000-4-6;Voltage dips and interruptions immunity test IEC 61000-4-11

  regulation loop

  Adjustable PI regulator

  Ambient Air Temperature for Storage

  -13…158 °F (-25…70 °C)

  Category

  22157-ATV212 1 - 25 HP 460 VOLT

  Discount Schedule

  CP4D

  GTIN

  3606480322518

  Returnability

  Yes

  Country of origin

  ID

  Unit Type of Package 1

  PCE

  Number of Units in Package 1

  1

  Package 1 Height

  10.63 in (27 cm)

  Package 1 Width

  11.81 in (30 cm)

  Package 1 Length

  9.06 in (23 cm)

  Package 1 Weight

  13.49 lb(US) (6.117 kg)

  Unit Type of Package 2

  P06

  Number of Units in Package 2

  10

  Package 2 Height

  29.53 in (75 cm)

  Package 2 Width

  23.62 in (60 cm)

  Package 2 Length

  31.50 in (80 cm)

  Package 2 Weight

  163.52 lb(US) (74.17 kg)

  Warranty

  18 months

  Resources

  Datasheet More Info